A sample carrier for measuring discrete powdered samples with an ITRAX XRF core scanner

Skip to Navigation

EarlyView Article

  • Published: Sep 10, 2017
  • Author: Christian Ohlendorf
  • Journal: X-Ray Spectrometry

The elemental composition of discrete powdered sediment samples can be measured by the energy‐dispersive X‐ray fluorescence (XRF) system that is installed in XRF core scanners. Because an appropriate sample carrier for powdered samples is currently not available, for example, for the ITRAX XRF core scanner, such a carrier is presented in this technical note. The designed sample carrier can hold 30 sample cups with a volume of 0.88 cm3 each. A maximum of 5 sample carriers, that is, 150 samples, can be measured in one run. The sample cups and carriers are optimized for a measurement procedure with a step size of 5 mm and variable count times up to 100 s per sample. With this setting, data are collected from an area of 100 mm2 in the center of the sample thereby ensuring a good representativeness of the signal because potential sample inhomogeneity is accounted for. Because the described sample carrier system allows rapid element analyses of discrete powdered environmental samples with an XRF core scanner, it may in some cases represent a time‐ and cost‐efficient alternative to conventional XRF analyses.

Social Links

Share This Links

Bookmark and Share

Microsites

Suppliers Selection
Societies Selection

Banner Ad

Click here to see
all job opportunities

Most Viewed

Copyright Information

Interested in spectroscopy? Visit our sister site spectroscopyNOW.com

Copyright © 2017 John Wiley & Sons, Inc. All Rights Reserved